Mar 22, 2023
At present, the development direction of the world's organosilicon material technology is high performance, multi-function and composite. It is an important direction for the development of silicone technology to realize the compounding of organic polymers and silicone materials by cooperating with technological progress and adding new additives, as well as changing crosslinking methods, copolymerization, blending and other modification technologies. Scientists and technicians design various silicone products with different molecular structures according to their needs through the following ways to meet the needs of different occasions, especially the development of high technology.
In recent years, although there are more and more organic silicon products, in summary, there are three main aspects of new technologies used in the application and development of new organic silicon materials.
1.Reinforced rubber Introducing a small part (<20%) of thermoplastic polymers into silicone rubber to replace inorganic fillers such as silica can be made into thermoplastic elastomer (TPE), which can be processed and formed by plastic method, and the strength can also be improved a lot .
2.Reinforced plastics Introduce a small amount of PDMS to improve the toughness of engineering plastics (such as nylon, polycarbonate, etc.), improve the impact strength, and also improve the precision of machining.
3.Improve surface properties Introduce PDMS into some polymers (such as epoxy resin, natural rubber, polyimide, etc.), even if the halo is only 1% to 3%, the surface properties can be improved, from Hydrophilic becomes hydrophobic, easy to release during processing, can also improve lubricating performance, reduce friction coefficient, and not easy to oxidize and damage during friction.
4.Preparation of separation membrane The air permeability of PDMS is one or two orders higher than other polymers, but its strength is poor, and it cannot be used as a membrane alone. Combining with other polymers solves the support problem, and its selectivity coefficient can also be improved.
5.Medical materials Organosilicon is widely used in medical materials.
6. Preparation of liquid crystal skeleton On the polyhydromethylsiloxane, various liquid crystal groups are connected through the hydrosilicon addition reaction to prepare high-molecular liquid crystals, so that the phase transition temperature is widened, and the crystal state is relatively stable. The chemical effects of some liquid crystals are also evident.
7.Reduce the processing temperature. Some polymers such as polyimide and polyarylate have high melting points and thermal decomposition during processing. The introduction of PDMS can reduce the processing temperature.
After several years of study and research, Silibase Silicone D&P develop a wide range of Silicone Resins. Product Lists as below:
silicone coating resin
Silicone Resin Paint
Silicone Modified Acrylic Resin
Smokeless Silicone Resin
Self-drying Silicone Resin
Highly Active Silicone Resin
If you have any problem,please contact us.